WiFi Radio Solution

WiFi radio works over an existing or new standard WiFi network. No need for installing radio repeaters, cabling and antennas. This license free radio system provide instant group talk and individual call to the users within the site or across multiple sites.

• Easy system to set up and use
• Up to 100 users can communicate at the same time
• Encryption provides extra security
• Range is only restricted by your IP network coverage
• No license fee required, no call charges

Basic Functions

The IP100H IP communication terminal transmits voice and preprogrammed text messages to the IP1000C controller through the wireless LAN access points installed in the IP network (VPN). The controller redirects traffic to the specified terminals. The optional IP100FS remote communicator can create a virtual radio and simple dispatch station on a Windows® based PC. The IP100FS can obtain position information (based on using access points) and status information of each terminal.

IP100H

Two-way Radio That Works Over a Standard Wi-Fi Network

License-Free System

No radio licenses are necessary for the system as it uses standard WLAN networking products as infrastructure. The system uses the IEEE 802.11 a/b/g/n standard.

Full-duplex Communication

The IP100H can talk and receive at the same time. All users in the system can communicate simultaneously*.
*With an optional earphone-microphone

High Security

The wireless LAN security protocols (WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES) encrypt your private conversations.

Group or Individual Call

The IP100H/IP100FS can make Individual calls, Group conference calls, All calls and Area calls. The unique Area call function allows you to call any user who is accessing the specified access point.

Mixing Function

The mixing function receives multiple user’s voices at the same time. One-to-many communication is possible and the efficiency of information sharing increases.

Seamless Roaming

If two or more wireless access points are deployed over an IP network, the IP100H can access the nearest access point and can roam between access points.

Other Features:

  • Status and Short Data Messaging The IP100H/IP100FS can send status and short data messages* to other users. The IP100H can send only preprogrammed messages.
  • Scalable System Deploying wireless access points over an IP network can expand the communication range. Dispersed sites can also be connected over an IP network (VPN). Range is only restricted by your IP network coverage.
  • Easy Maintenance The IP1000C programs almost all terminal configurations over the air. Individual PC programming via cable connection is not required.

WiFi (WLAN) Radio System Components:

IP100H Portable

  • IPX7 waterproof (1m depth water for 30 minutes) for outdoor work or places prone to get wet.
  • Compact 58×95×26.4 mm body and 205g (approximate) lightweight.
  • Vibration alert function for incoming calls.
  • Tested to the MIL-STD 810G specifications.
  • Supplied Accessories: IP100H, BP-271 Li-Ion battery pack, MB-127 belt clip, Hand strap, Antenna, Antenna cap

IP1000C Controller

  • The IP1000C controls all terminal configurations and voice traffic.
  • Capable of controlling up to 100 or 20* terminals (including IP100FSs).
  • Links up to 11 IP1000Cs over an IP network (Internet VPN) and increases the number of usable IP100H/IP100FS communication terminals to 1100 units. *Depending on the IP1000C version.
  • Supplied Accessories: IP1000C, BC-207S AC adapter, Cushion sheets, Ferrite core

AP-95M Access Point

  • IEEE 802.11 ac/n/a/g/b standard
  • PoE (Power over Ethernet) capability
  • Optional RS-AP3, Access point management software

Optional IP100FS Software

  • The IP100FS can communicate with IP communication terminals from a PC.
  • The IP100FS can obtain location information of each IP100H based on the access point being used.
  • Can be installed on a Windows® based tablet PC as well as a laptop PC.

Get in touch with us to learn more about license-free Wi-Fi Radio Solutions.